Table of Contents
Advertisement
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Option 1
Extension Number
Specifies the extension number of the extension.
Value Range
Max. 5 digits (consisting of 0–9)
Extension Name
Specifies the name of the extension.
Value Range
Max. 20 characters
Wireless XDP / Shared Extension
Specifies the extension number of the PS with which Wireless XDP Parallel Mode is established. To enable
Wireless XDP Parallel Mode, the PS must be turned off once and then turned on after assigning this setting.
This setting also specifies the sub extension for the main extension of a one-numbered extension.
Value Range
Max. 5 digits (consisting of 0–9)
Feature Guide References
2.11.11 One-numbered Extension
Ring Pattern Table
Specifies the Ring Tone Pattern Table to be used by the extension.
Value Range
1–8
PC Programming Manual References
10.8.1 PBX Configuration—[2-8-1] System—Ring Tone Patterns—Call from CO
10.8.2 PBX Configuration—[2-8-2] System—Ring Tone Patterns—Call from DOORPHONE
10.8.3 PBX Configuration—[2-8-3] System—Ring Tone Patterns—Call from Others
Feature Guide References
2.1.3.2 Ring Tone Pattern Selection
Programmed Mailbox No.
Specifies the mailbox number of the incoming call distribution group's mailbox for Voice Processing Systems
(VPS) with DTMF Integration.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
524
PC Programming Manual
Advertisement
Table of Contents
