Snmp Agent - Panasonic NS1000 Manual

SNMP Agent Features
NS1000 includes SNMP features. It is possible for a PC assigned as an SNMP manager to manage and
receive PBX system status information, such as alarm information and general system activity using
SNMP.
Management Information Bases (MIBs) are sent to a PC (i.e., the SNMP manager) connected to the PBX
over a LAN and can then be stored and analyzed using SNMP manager software.
There are two monitoring methods, Polling and Trap
Polling Method
The SNMP Manager sends request messages to collect the status of KX-NS1000, and then KX-NS1000
sends response to the SNMP Manager.
Trap Method
KX-NS1000 sends information when a status change occurs or an alarm is detected.
• Up to 2 SNMP managers can be assigned.
• This PBX supports SNMP Protocol Version 1.0 and SNMP Version 2c.
• This PBX can only receive read-only MIBs. Write MIBs are not supported.
• This PBX supports MIB II.

3.2 SNMP Agent (1)

Polling Method
Trap Method
SNMP
Manager