Table of Contents
Advertisement
5.1.1 System Control—Program Update—Download Program File
Software updates for PBX hardware components can be downloaded to the PBX. Manual and automatic
methods are available.
Programme downloading can be performed only in On-line mode.
Note
•
When using an FTP server with this feature, the programme files to be downloaded to the
KX-NS300 PBX must be named on the FTP server in a specific way that includes the version number.
Example: "PNT300_xxx_xxx_xxx"
("xxx_xxx_xxx" is the version number.)
Manual
Using manual operations, the location of updated PBX software is specified and downloaded to the Main unit.
To download programme files manually
1.
In Location of program files, specify the location of the updated files from the Look in drop-down list.
The choices are as follows:
•
Local PC
Click Browse and specify the location of the updated programme files stored on the PC logged in to
Web Maintenance Console.
•
USB Memory
If a USB memory device is inserted into the PBX, the contents of the following directory on the device
will be checked for updated files:
/private/meigroup/psn/ippbx/update
•
FTP Server
The PBX connects to the specified FTP server and checks for updated files. Specify an FTP server
from the FTP connection name drop-down list, and specify the number of attempts to connect to the
FTP server in No. of retries.
To specify a new FTP site, see 27.3.1 Network Service—[3-1] Client Feature—FTP.
•
NAS
Specify the location of the updated programme files stored on a directory of the NAS to Web
Maintenance Console.
2.
Specify which PBX programme files will be automatically downloaded by checking the boxes next to each
hardware item.
3.
For FTP Server only
Click Check to confirm the connection to the FTP server. If a connection is established, the Execute button
will become active.
4.
Click Execute, and then click OK on the confirmation message that appears. When the transfer is complete,
click OK.
Note
•
If downloading cannot be completed within 10 minutes (due to slow network speeds or other connection
problems), the download operation will be cancelled.
Automatic
The Main unit is set to automatically check an FTP server for updated programme files. If an update is available,
the Main unit will download the data.
To download programme files automatically
1.
For Download Server, select an FTP site.
To specify a new FTP site, see 27.3.1 Network Service—[3-1] Client Feature—FTP.
2.
For Download mode, select one of the following:
•
None: No actions are taken (automatic downloading is disabled).
5.1.1 System Control—Program Update—Download Program File
PC Programming Manual
65
Advertisement
Table of Contents
