Table of Contents
Advertisement
9.14 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT—Port Property
Payload Type
Specifies the payload type for DTMF tones using RFC2833. Programming this parameter is only necessary if
DTMF is set to Outband (RFC2833).
Value Range
96–127
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Remote Place
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Extension Number
Specifies the extension number of the port.
Value Range
Max. 5 digits (consisting of 0–9)
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Extension Name
Specifies the extension name of the port.
Value Range
Max. 20 characters
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port. This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
266
PC Programming Manual
Advertisement
Table of Contents
