Table of Contents
Advertisement
Dial Tone—Dial Tone for ARS
Selects the dial tone the PBX (instead of the network) sends to the caller when a call is made using the ARS
feature, or ISDN En Bloc dialling.
Value Range
Type A, Type B
PC Programming Manual References
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
16.1 PBX Configuration—[8-1] ARS—System Setting
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
2.25.1 Dial Tone
Echo Cancel—Conference
Enables the use of echo cancelling for conference calls.
Value Range
Disable, Enable
Feature Guide References
2.14.2 Conference
Echo Cancel—CO-to-CO
Enables the use of echo cancelling for trunk-to-trunk calls.
Value Range
Disable, Enable
Echo Cancel—Extension to Analogue Line
Enables the use of echo cancelling for extension-to-analogue trunk calls.
Value Range
Disable, Enable
Echo Cancel—Extension to Digital Line
Enables the use of echo cancelling for extension-to-ISDN line calls.
If set to "Enable", echo cancelling is used for extension-to-ISDN line calls.
If set to "Disable", echo cancelling is not used for extension-to-ISDN line calls.
Value Range
Disable, Enable
10.9 PBX Configuration—[2-9] System—System Options
PC Programming Manual
435
Advertisement
Table of Contents
