Table of Contents
Advertisement
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
Feature Guide References
2.2.2.2 Group Call Distribution
Wrap-up Timer
Specifies the length of time that must pass after completing a call before the member extension can accept
another call.
This timer is used when "
11.5.3 PBX Configuration—[3-5-3] Group—Incoming Call Distribution Group—Miscellaneous.
Value Range
10 ´ n (n=0–300) s
PC Programming Manual References
11.5.3 PBX Configuration—[3-5-3] Group—Incoming Call Distribution Group—Miscellaneous—
Options—Wrap-up Timer based on
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 8—
Timer
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 8—
Timer
Feature Guide References
2.2.2.7 Log-in/Log-out
Options—Wrap-up Timer based on" is set to "ICD Group Member" in
Wrap-up
Wrap-up
PC Programming Manual
485
Advertisement
Table of Contents
