Table of Contents
Advertisement
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Extension Number
Specifies the extension number of the port.
Value Range
Max. 5 digits (consisting of 0–9)
Extension Name
Specifies the extension name of the port.
Value Range
Max. 20 characters
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Phone Location
Specifies the type of extension connected to the port.
Value Range
Local: The extension is located on the same network as the PBX (standard configuration).
Remote (SBC): The extension is accessing the PBX remotely (Simple Remote Connection).
Remote (MRG): The extension is accessing the PBX remotely (use Media Relay Gateway).
Feature Guide References
5.2.2.1 Simple Remote Connection
Web-MC Ability
Specifies whether the Web programming is allowed on the KX-UT series SIP phone connected to the port by
enabling the Web port setting on the phone's menu. For details about Web programming for KX-UT series SIP
phones, refer to the documentation of the phone.
Value Range
Enable, Disable
9.20 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT—Port Property
PC Programming Manual
293
Advertisement
Table of Contents
