Panasonic KX-NS300CN Pc Programming Manual page 25

Note
Off-line Web Maintenance Console cannot be used when the PBX Web Manager for Unified PC
Maintenance Console (for KX-TDA/KX-TDE/KX-NCP PBXs) is running on the PC.
To disable the PBX Web Manager:
1.
In the Unified PC Maintenance Console launcher, click Option®PBX Web Manager.
2.
Deselect the Enable Web Server check box.
3.
Click OK.
Starting a New System Data File
You can start a new session of PBX programming in Off-line mode. You can then programme PBX settings in
Off-line Web Maintenance Console and then save them to a file you can later upload to the PBX.
Note
Since selecting this option creates a blank system data file, uploading this file to the PBX will overwrite all
previous settings. Use this function only when necessary.
To create a new system data file
1.
In the Programme Launcher, click New -Offline Mode. The Off-line Web Maintenance Console login
screen will be displayed in your PC's Web browser. For details about the login screen, see 2.1.3 Logging
in to Web Maintenance Console.
2.
Log in to Off-line Web Maintenance Console using the Installer level account and password to start the
Easy Setup Wizard. For details, see 2.1.4 Easy Setup Wizard.
To convert a KX-TDA100/KX-TDA200's or KX-TE's system data file to KX-NS300
KX-TDA100/KX-TDA200 or KX-TE system data can be converted for use with the KX-NS300 by using the
Database Converter.
1.
In the Programme Launcher, click Database Converter. The Database Converter screen will be displayed
in your PC.
For details, refer to "Converting KX-TDA100/KX-TDA200 or KX-TE series System Data for Use with the
KX-NS300" in "5.3 Starting Web Maintenance Console" in the Installation Manual.
Off-line Web Maintenance Console Programme Launcher
1.2.2 PC Programming Using Off-line Mode
PC Programming Manual 25