Panasonic KX-NS300CN Pc Programming Manual page 432

10.9 PBX Configuration—[2-9] System—System Options
3.
"CO to TIE" calls.
PBX
4.
Conference calls that include legacy trunks and IP trunks.
Legacy Trunk
You can check the programming status and call restriction status of Logical Partitioning in
7.3.5 Utility—Log—Call Control Log.
Note
When local partitioning is applied, if there are QSIG connections between KX-NS300s, the connected
KX-NS300s are considered to be the same area and restrictions for private lines are removed. Connections
from outside lines of other devices to private lines are restricted under all circumstances. QSIG connections
using PRI adaptors are also restricted.
Value Range
Disable, Enable
PC Programming Manual References
7.3.5 Utility—Log—Call Control Log
9.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Main—
Option 3
Confirmation Tone—Tone 1 : Called by Voice
Enables the PBX to send Confirmation Tone 1. Confirmation Tone 1 is heard from a PT when it receives a call
in voice-calling mode.
Value Range
Disable, Enable
432 PC Programming Manual
Legacy Trunk
Private
Line
CO-to-TIE: Restricted
IP Trunk
Restricted
Conf.
PBX
Extension
IP Trunk
PBX
Area ID for logical partition