Table of Contents
Advertisement
11.11.2 PBX Configuration—[3-11-2] Group—VM(DPT) Group—Unit Settings
11.11.2 PBX Configuration—[3-11-2] Group—VM(DPT)
Group—Unit Settings
A VM (DPT) group has a floating extension number, which can be assigned as the destination for redirected
calls and incoming calls.
To assign extension numbers to the group, click Member List. To view a list of all programmed extension
numbers and types, click Extension List View.
Floating Extension No.
Specifies the floating extension number of the VM (DPT) group.
Value Range
Max. 5 digits (consisting of 0–9)
PC Programming Manual References
9.22 PBX Configuration—[1-1] Configuration—Slot—Extension—Port Property
Feature Guide References
2.28.1 Voice Mail (VM) Group
2.28.3 Voice Mail DPT (Digital) Integration
Group Name
Specifies the name of the VM (DPT) group, which will be shown on the display of extensions that call the VM
(DPT) group.
Value Range
Max. 20 characters
PC Programming Manual References
9.22 PBX Configuration—[1-1] Configuration—Slot—Extension—Port Property
Feature Guide References
2.28.1 Voice Mail (VM) Group
2.28.3 Voice Mail DPT (Digital) Integration
Centralised VM Unit Setting
Floating Extension No. (TIE)
Specifies the floating extension number of the centralised VM (DPT) group. This floating extension number
must start with the number used to access a TIE line or the extensions of another PBX.
Value Range
Max. 8 digits (consisting of 0–9, *, and #)
506
PC Programming Manual
Advertisement
Table of Contents
