Table of Contents
Advertisement
Dial Digits Limitation After Answering—Dial Digits
Specifies a limit to be placed on the number of digits which can be dialled after an extension user receives a
trunk call. If the number of dialled digits exceeds the programmed limit, the line will be disconnected.
Value Range
None, 1–7
Feature Guide References
2.7.1 Toll Restriction (TRS)/Call Barring (Barring)
2.11.8 Trunk Call Limitation
TRS Check after EFA
Enables TRS/Barring to check the digits dialled after External Feature Access (EFA) during a trunk call.
Value Range
Disable, Enable
Feature Guide References
2.7.1 Toll Restriction (TRS)/Call Barring (Barring)
2.11.7 External Feature Access (EFA)
TRS Table Mode for Level N (N=2_6)
Selects the method of TRS/Barring to be used for restricting calls. The level of TRS/Barring is determined by
the telephone codes set in the Denied Code Tables and Exception Code Tables.
Value Range
Deny Table 2_N + Except Table N_6: The Denied Code Tables for the higher levels are applied to all levels
below it, and the Exception Code Tables for the lower levels are applied to all levels above it.
Deny Table N + Except Table N: Each level has its own separate set of denied codes and exception codes,
which are only applied to that level.
Feature Guide References
2.7.1 Toll Restriction (TRS)/Call Barring (Barring)
15.5 PBX Configuration—[7-5] TRS—Miscellaneous
PC Programming Manual
645
Advertisement
Table of Contents
