Table of Contents
Advertisement
9.16 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT—Port Property
the Copy to button. This parameter can only be modified when the virtual SIP extension port is set to OUS,
and the programmer must be in On-line mode.
Value Range
4–16 characters (consisting of 0–9, a–z, A–Z)
Feature Guide References
5.2.2 SIP (Session Initiation Protocol) Extension
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port. This option is only available in On-line mode.
Value Range
INS: The port is in service
OUS: The port is out of service
Fault: The port is not communicating with the network.
Feature Guide References
5.2.2 SIP (Session Initiation Protocol) Extension
Phone Location
Specifies the type of extension connected to the port.
Value Range
Local: The extension is located on the same network as the PBX (standard configuration).
Remote (MRG): The extension is accessing the PBX remotely (Media Relay Gateway).
Feature Guide References
5.2.2 SIP (Session Initiation Protocol) Extension
FAX/T.38
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common Programming
Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Extension Number
Specifies the extension number of the port.
Value Range
Max. 5 digits (consisting of 0–9)
Feature Guide References
5.2.2 SIP (Session Initiation Protocol) Extension
274
PC Programming Manual
Advertisement
Table of Contents
