Table of Contents
Advertisement
16.5 PBX Configuration—[8-5] ARS—Carrier
Carrier
It is possible to specify how user-dialled numbers are modified for connecting to the appropriate carrier. A
maximum of 48 different carriers can be programmed to be used with the ARS feature.
Carrier Name
Specifies the carrier name.
Value Range
Max. 20 characters
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
Removed Number of Digits
Specifies the number of leading digits to remove from the user-dialled number.
Value Range
0–15
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
Modify Command
Specifies the commands to modify the user-dialled number to access the carrier. For details of each command,
see the Feature Guide.
Value Range
Max. 16 characters (consisting of 0–9, *, #, C, P, A, G, I and H)
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
CLIP Table No.
Sets the CLIP numbers established for each extension (wired/wireless) of a carrier. The CLIP IDs for each
CLIP number are set in 12.1.7 PBX Configuration—[4-1-7] Extension—Wired Extension—CLIP ID
Table and 12.2.5 PBX Configuration—[4-2-5] Extension—Portable Station—CLIP ID Table.
Value Range
1–8
16.5 PBX Configuration—[8-5] ARS—Carrier
PC Programming Manual
653
Advertisement
Table of Contents
