Io-Link Master Module And Io-Link Device Tag Definitions; Tag Name Conventions; Access The Tags - Rockwell Automation Allen-Bradley ArmorBlock 5000 Series User Manual

Tag Name Conventions

Access the Tags

IO-Link Master Module and IO-Link Device Tag
Definitions
When you create an IO-Link master module or IO-Link device, the Studio 5000 Logix Designer
application creates a set of tags that you can view in the Tag Editor. Each configured feature
on your module or device has a distinct tag that is available for use in the controller ladder
program.
The tag names use defined naming conventions. The conventions are as follows:
Example module tag name = Name:I.Pt01.Data
• Name = Name of the module
• I = Tag type
• Pt01 = Module channel number
• Data = Tag function
In this example, Data represents the input data that is returned to the controller.
You view tags from the Tag Editor.
1. Open your Studio 5000 Logix Designer application project.
2. Right-click Controller Tags and select Monitor Tags.
3. Open the tags as necessary to view specific tags.
Rockwell Automation Publication 5032-UM001A-EN-P - April 2023
C
Appendix
97