XX - Digital Input
This view is available when the channel is configured as "Digital Input". You can perform
certain tasks only when the project is online.
Use this view to complete the following tasks:
•
Select the Input Filter Time.
•
Access the channel diagnostics.
.
XX - Digital Input, Timestamp
This view is available when the channel is configured as "Digital Input, Timestamp". You can
perform certain tasks only when the project is online.
Use this view to complete the following tasks:
•
Select the Input Filter Time.
•
Capture time stamps for Input transitions.
•
Enable or disable Timestamp Latching.
•
Enable or disable Chatter Detection.
•
Configure the Chatter Detection options.
•
Access the channel diagnostics.
Rockwell Automation Publication 5032-UM001A-EN-P - April 2023
Chapter 5
Configure the IO-Link Master Module
51