Table of Contents
Advertisement
About the 1753-OW8 Relay Output Module
The 1753-OW8 relay output module is a distributed I/O module for use with GuardPLC
controllers. The module features eight relay outputs as shown below.
Voltage Supply
Connection
L-
L-
24V DC
Ethernet Ports
(on bottom of controller)
General Safety
Prevent Electrostatic Discharge
1
2
L+ L+
DO1
DO5
9
ATTENTION: Personnel responsible for the application of safety-related
programmable electronic systems (PES) shall be aware of the safety
requirements in the application of the system and shall be trained in using the
system.
ATTENTION: This equipment is sensitive to electrostatic discharge, which can
cause internal damage and affect normal operation. Follow these guidelines
when you handle this equipment:
•
Touch a grounded object to discharge static potential.
•
Wear an approved wrist-strap grounding device.
•
Do not touch connectors or pins on component boards.
•
Do not touch circuit components inside the equipment.
•
Use a static-safe workstation, if available.
•
Store the equipment in appropriate static-safe packaging when not in use.
Rockwell Automation Publication 1753-IN012C-EN-P - June 2010
Relay Outputs (1...4)
3
4
5
6
DO2
DO3
DO6
10
11
12
13
Relay Outputs (5...8)
GuardPLC Relay Output Module
7
8
DO4
1753-OW8
8 Digital Outputs
DO7
DO8
14
15
16
3
Advertisement
Table of Contents
