Port Configuration View; Network View - Rockwell Automation Allen-Bradley ArmorBlock 5000 Series User Manual

Port Configuration View

The Port Configuration view shows the status information of the network ports. You can
perform certain tasks only when the project is online.
Use the Port Configuration view to complete the following tasks:
• Enable/disable network ports.
• Enable/disable Auto-Negotiate.
• Select communication speed.
• Select Duplex mode.
• Access Port Diagnostics.

Network View

The Network view shows the status information that is related to the Device Level Ring (DLR)
Network Mode when the project is online.
Rockwell Automation Publication 5032-UM001A-EN-P - April 2023
Chapter 5 Configure the IO-Link Master Module
57