Input Events View - Rockwell Automation Allen-Bradley ArmorBlock 5000 Series User Manual

XX - Digital Input, Fallback
This view is available when the channel is configured as "Digital Input, Fallback". You can
perform certain tasks only when the project is online.
This view is a combination of the views for "IO-Link" and "Digital Input". For more information,
see the following:
• XX - IO-Link on page 50
• XX - Digital Input on page 51
XX - Digital Input, Timestamp, Fallback
This view is available when the channel is configured as "Digital Input, Timestamp, Fallback".
You can perform certain tasks only when the project is online.
This view is a combination of the views for "IO-Link" and "Digital Input, Timestamp". For more
information, see the following:
• XX - IO-Link on page 50
• XX - Digital Input, Timestamp on page 51

Input Events View

The Input Events view shows an overview of the configuration values for all input events. You
can perform certain tasks only when the project is online.
This view is only available when you select the "Data with Events" or "Data with Events and
Ethernet Status" connection type in the Module Definition. See
IMPORTANT You cannot configure events on the Input Events view. The parameters
that are displayed in this view are read-only.
You must use the Event Output tags to configure an event. For more
information, see
page
Rockwell Automation Publication 5032-UM001A-EN-P - April 2023
Chapter 5
Event Output Tags for IO-Link Master Module on
104.
Configure the IO-Link Master Module
Module Definition on page 45.
53