New Module - Rockwell Automation Allen-Bradley ArmorBlock 5000 Series User Manual

New Module

You can use the new module method when the project is offline or online.
To use the New Module method, complete these steps.
1. In the I/O Configuration tree, right-click the IO-Link bus and select New Module.
The Select Module Type dialog appears.
2. Select the device and select Create.
To narrow down the list of devices, use the filters or search with keywords.
The New Module window appears and shows the General view.
Rockwell Automation Publication 5032-UM001A-EN-P - April 2023
Chapter 6 Configure the IO-Link Device
65