General View - Rockwell Automation Allen-Bradley ArmorBlock 5000 Series User Manual

Chapter 6 Configure the IO-Link Device
68

General View

The General view appears first when you create an IO-Link device.
Use this view to complete the following tasks:
• Name the device.
• Describe the device.
• Change the Channel number.
• Access the Module Definition.
Module Definition
Module Definition parameters are accessed from the General view of the Module Properties
window.
Table 14 describes the Module Definition parameters for IO-Link devices.
Rockwell Automation Publication 5032-UM001A-EN-P - April 2023