Module Info View
The Module Info view shows the module and status information when the project is online and
lets you reset the module.
Use the Module Info view to complete the following tasks:
•
Determine the identity of the module.
•
Access module diagnostic.
•
Refresh the data on the screen.
•
Reset the module.
Channels View
The Channels view shows an overview of the configuration values for all module channels. The
values for each parameter indicate how that particular channel is configured on that specific
channel view.
IMPORTANT You can edit the fields on the Channels view. However, we recommend
that you change channel configuration on the specific channel view as
described in the rest of this section.
Use this view to monitor the configuration for all module channels.
Rockwell Automation Publication 5032-UM001A-EN-P - April 2023
Chapter 5
Configure the IO-Link Master Module
49