Io-Link Event Log - Rockwell Automation Allen-Bradley ArmorBlock 5000 Series User Manual

IO-Link Event Log

This section provides information about IO-Link events, event data structure, and a list of
port-level IO-Link events.
Figure 18 shows an example of a port-level IO-Link event log.
To access the port-level IO-Link event log, see
Figure 18 - IO-Link Port Event Log Example
Table 26 describes the enumeration and definition of port-level IO-Link events. For more
information, see the IO-Link Interface and System Specification at io-link.com.
Table 26 - IO-Link Port-Level Event Codes
Event Code ID Event Type
0x1800 Error
0x1802 Error
0x1803 Error
0x1804 Error
0x1805 Error
0x1806 Error
0x1807 Error
0x1809 Error
0x180A Error
0x180B Error
0x180C Error
0x180D Error
0x180E Error
0x180F Error
0x1810 Error
0x1811 Error
0x1812 Error
0x1813 Error
0x1FF1 Error
0x1FF2 Notification
0x6000 Error
0x6001 Error
0xFF26 Notification
0xFF27 Notification
For IO-Link device event codes, see the IO-Link Interface and System Specification at
io-link.com, and the documentation for the device for more information.
Rockwell Automation Publication 5032-UM001A-EN-P - April 2023
Appendix B
XX - IO-Link on page
Description
No Device (communication)
Incorrect VendorID – Inspection Level mismatch
Incorrect DeviceID – Inspection Level mismatch
Short circuit at C/Q – Check wire connection
PHY overtemperature – Check Master temperature and load
Short circuit at L+ – Check wire connection
Overcurrent at L+ – Check power supply (for example, L1+)
Backup inconsistency – Memory out of range (2048 octets)
Backup inconsistency – Identity fault
Backup inconsistency – Data Storage unspecific error
Backup inconsistency – Upload fault
Parameter inconsistency – Download fault
P24 (Class B) missing or undervoltage
Short circuit at P24 (Class B) – Check wire connection (for example, L2+)
Short circuit at I/Q – Check wiring
Short circuit at C/Q (if digital output) – Check wiring
Overcurrent at I/Q – Check load
Overcurrent at C/Q (if digital output) – Check load
IO-Link PHY communication error
IO-Link port restarted
Invalid cycle time
Revision fault – Incompatible protocol version
Port status changed
Data Storage upload completed
Troubleshoot Your IO-Link Device
50.
95