Rockwell Automation Allen-Bradley ArmorBlock 5000 Series User Manual page 64

Chapter 6 Configure the IO-Link Device
64
3. Select Create for the device that you want to add to your project.
If a device shows Register, it means that there is no IODD registered for the device.
Select Register to go through the registration process as described in
Device IODD on page
The New Module dialog appears and shows the General view. A list of different views is
shown on the left side.
4. Enter a Name for the device, which is also used in the name of the Tag elements that
get created for the device.
If you want to configure the other settings during this step, see
Properties on page 67
5. Select OK to save the configuration.
A prompt appears to request to inhibit the device. We recommend inhibiting the device
if the device is not fully configured or not ready to be put into operation currently.
6. Repeat steps 3...5 to add another device, or close the Select Module Type dialog when
done.
If you selected the Close on Create checkbox in step 3, the Select Module Type dialog
automatically closes and you must start from step 2 to add another device.
Rockwell Automation Publication 5032-UM001A-EN-P - April 2023
61.
for more information.
Register IO-Link
Edit the IO-Link Device