Specifications; Updated General Specifications - Rockwell Automation Allen-Bradley C Series Installation Instructions Manual

Indicator Status for Modules (Continued)
Indicator Status
Off
Solid green
Flashing green
Channel status
Solid red
Flashing red

Specifications

Input Specifications
Attribute
Number of inputs
Resolution
Input current
Input voltage
(1)
Absolute accuracy
Accuracy drift with temp
Input update rate (per module)
Input step response (per channel)
Digital filter time constant
Input impedance
Input resistance
Conversion type
Common mode rejection ratio
Normal mode rejection ratio
Notch filter
Data format
Maximum overload
Calibration
(1) Includes offset, gain, non-linearity, and repeatability error terms.
General Specifications
Attribute
Terminal base
Terminal base screw torque
Indicators, logic side
Keyswitch position
POINTBus™ current, max
Power dissipation, max
Description
Module is in CAL mode.
Normal operation is present with channel scanning inputs.
Channel is being calibrated.
Major channel fault is present.
Channel is at end of range (0 mA or 21 mA) for 1734-IE2C, 1734-IE2CK.
Channel is at end of range (over or under) for 1734-IE2V, 1734-IE2VK.
1734-IE2C, 1734-IE2CK
2 single-ended, non-isolated, current
16 bits – over 0...21 mA
0.32 µA/cnt
4...20 mA
0...20 mA
–
0.1% Full Scale @ 25 °C (77 °F)
30 ppm/°C
120 ms @ Notch = 50 Hz
100 ms @ Notch = 60 Hz (default)
24 ms @ Notch = 250 Hz
12 ms @ Notch = 500 Hz
80 ms @ Notch = 50 Hz
70 ms @ Notch = 60 Hz (default)
16 ms @ Notch = 250 Hz
8 ms @ Notch = 500 Hz
0...10,000 ms (default = 0 ms)
60 Ω
60 Ω
Delta Sigma
120 dB
-60 dB
-3 dB settable at the following:
13.1 Hz @ Notch = 50 Hz
15.7 Hz @ Notch = 60 Hz
65.5 Hz @ Notch = 250 Hz
131 Hz @ Notch = 580 Hz
Signed integer
Fault protected to 28.8V DC
Factory calibrated
1734-IE2C, 1734-IE2CK
1734-TB, 1734-TBS, 1734-TOP, or 1734-TOPS
0.6 N•m (7 lb•in)
1 green/red – module status
1 green/red – network status
2 green/red – input status
3
75 mA @ 5V DC
0.6 W @ 28.8V DC
Rockwell Automation Publication 1734-IN027E-EN-E - June 2023
POINT I/O 2 Current and 2 Voltage Input Analog Modules Installation Instructions
1734-IE2V, 1734-IE2VK
2 single-ended, non-isolated, voltage
15 bits plus sign
320 µA/cnt in unipolar or bipolar mode
–
0...10V user configurable
(-0.0V under, +0.5V over)
±10V user configurable
(-0.5V under, +0.5V over)
5 ppm/°C
100 kΩ
200 kΩ
1734-IE2V, 1734-IE2VK
0.75 W @ 28.8V DC
11