Table of Contents
Advertisement
Inlet Assemblies
Sampling Tube
Extensions
Weather Enclosure
Rack Mounting
Accessories
Thermo Fisher Scientific
Optional Equipment
Chapter 8
This chapter describes the Model 5030 optional equipment. Refer to
Table 8-1
for a list of the optional equipment part numbers.
The Model 5030 SHARP comes as a standalone unit with an external
vacuum pump and it can store a year's worth of data.
The Model 5030 can be used for different applications. Using different inlet
configurations (PM
, PM
10
(PM
), several particle size fractions can be monitored. The main
10-2.5
application is the measurement of PM
monitoring and health effect studies.
Often the most compatible way to install the Model 5030 at air quality
monitoring sites is to collocate the inlet at the same height as other
similar-use inlets. The "Installation" chapter discusses specific siting criteria.
In addition to using the above referenced inlets, extending the sample
downtube length is necessary using a rigid sample tube.
Note Extended lengths of flexible tubing can lead to particle loss and are
strongly discouraged.
If a climate-controlled shelter is not available for siting the Model 5030, a
weather-proof enclosure is available. Please inquire with your Thermo Fisher
Scientific representative.
Use Thermo Fisher Scientific part number FH132 Sliding Rail Hardware
for mounting the Model 5030 within a standard 19-inch rack.
Table 8-1. Optional Equipment Parts List
Option
Part No.
Inlet Assembly
57-000596
57-005896
, PM
Inlets) or enrichment techniques
2.5
1
and PM
10
2.5
Description
10-Micron Inlet (U.S. EPA PM
16.67 l/min)
2.5-Micron Sharp-Cut Cyclone (SCC) at 16.67 l/min)
Model 5030 SHARP Monitor Instruction Manual
for ambient air quality
Inlet as per 40 CFR at
10
8-1
Advertisement
Table of Contents
