Preface Section
USEPA PM2.5 FEM: EQPM-0609-184
viii
Model 5030 SHARP Monitor Instruction Manual
The USEPA method required the SHARP to be installed with the
following Thermo Fisher Scientific hardware:
1. 10-micron omni directional inlet operated at 16.67 Lmin (e.g., Model
SA246b or as specified in 40 CFR 50, Appendix L) with PM
VSCC™.
2. Inlet to sample tube connector.
3. Standard 1-meter heater.
4. SHARP monitor.
5. Pump kit.
6. Glass fiber filter tape.
7. Vertical stabilization of sample tube, as necessary.
8. Nephelometer zeroing kit
2.5
Thermo Fisher Scientific