Filter Change Frequency
Thermo Fisher Scientific
Thermo Fisher Scientific SHARP v1.21 SERIAL NUMBER 323 04-02-24
Averages
Date/Time
04-02-23
04-02-23
04-02-20
04-02-20
04-02-20
04-02-20
04-02-20
...
04-02-18
END
Please note that the above Print Formats 30, 31, and 39 store both the
hybrid concentration and the traditional C14-Beta derived concentration.
40 & 41) Daily mean values: up to 380 lines
Print Format 41 has no header lines.
Thermo Fisher Scientific
---------------------------------------------------------------------
DAILY MEAN VALUES
DATE
o.k.%
CONC[
---------------------------------------------------------------------
04-02-23 100
17.9
04-02-22 100
4.3
04-02-21 100
7.6
04-02-20 100
24.7
04-02-19 100
22.4
.
.
The Model 5030 SHARP comes with a filter change cycle of 0-hours, a
filter change hour of 24 (midnight), and a mass limit of 1500 micrograms.
The Model 5030 SHARP will automatically perform a filter change when
the mass on the filter spot reaches 1500 micrograms, when the filter change
cycle has been reached, and when the filter change hour has been reached.
To change these settings, please cross-reference
commands in this manual.
Status
Conc
12:01
020058
11:01
2E01DB
17:01
000070
16:01
000070
15:01
000040
14:01
0000FB
13:01
0000CB
22:01
000040
SHARP v1.21
SERIAL NUMBER
μ
3
g/m
]
Operation and Service Menus
C-14-CONC
32.9
32.9
32.9
32.9
32.3
25.9
33.5
35.1
31.8
31.5
31.1
33.2
26.1
25.9
12.9
14.1
001
Table 3-1
Model 5030 SHARP Monitor Instruction Manual
Operation
04-02-24
and the RS-232
3-9