Thermo Scientific 5030 Instruction Manual page 5

Thermo Fisher Scientific
Preface Section
This manual provides information about operating, maintaining, and
servicing the Model 5030 SHARP Monitor. It also contains important
alerts to ensure safe operation and prevent equipment damage. The manual
is organized into the following chapters and appendices to provide direct
access to specific operation and service information:
Chapter 1 "Introduction" provides an overview of product features,
●
describes the principle of operation, and lists the specifications.
Chapter 2 "Installation" describes how to unpack, setup, and startup
●
the instrument.
Chapter 3 "Operation" describes the front panel display, the front
●
panel keypad, and the menu-driven software.
Chapter 4 "Calibration" provides the procedures for calibrating the
●
instrument and describes the required equipment.
Chapter 5 "Preventive Maintenance" provides a spare parts list and
●
preventive maintenance procedures to ensure reliable and consistent
instrument operation.
Chapter 6 "Troubleshooting" presents guidelines for diagnosing
●
instrument failures, isolating faults, and includes recommended actions
for restoring proper operation. It also includes descriptions of status
messages and reports.
Chapter 7 "Servicing" presents safety alerts for technicians working on
●
the instrument, step-by-step instructions for repairing and replacing
components. It also includes contact information for product support
and technical information.
Chapter 8 "Optional Equipment" describes the optional equipment
●
that can be used with this instrument.
Appendix A "Warranty" provides a copy of the warranty statement.
●
Appendix B "RS-232 Commands" provides a description of the RS-
●
232 commands that can be used to remotely control an instrument
using a host device such as a PC or a data logger.
Appendix C "Connector and Board Schematics" provides the
●
connector and board schematics for the Model 5030 main circuit
board.
Model 5030 SHARP Monitor Instruction Manual v