Table of Contents
Advertisement
7) Date, time, status, concentration, mass, flow rate, RH (%), T1 (
(%), P1 (hPa), P2 (hPa), P3 (hPa), BetaConc-short, BetaConc-long, Neph Counts, NephConc,
NephConc-long, Neph-CalFactor, and Beta Counts
04-10-26 15:39:38 000082 10.3 130.4 999.8 40.5 21.0 30.0 28.0 45.0 43.8 35.8 103.0 997.9 13.5 9.1
172 21.0 18.5 0.492 14562
Thermo Fisher Scientific
The following information provides examples of the Serial Output Print
Formats, whereby only Print Formats 1-7 will automatically be output
according to the Print Cycle:
1) Date, time, status, and concentration (μg/m
04-10-26 15:39:38 000000 10.3
2) Date, time, status, concentration and mass (μg)
04-10-26 15:39:38 000000 10.3 130.4
3) Date, time, status, concentration, mass, and air flow rate (l/h)
04-10-26 15:39:38 000000 10.3 130.4 1000
5) Date, time, status, concentration, ½ h Conc., 1h Conc., 3h Conc., and
Daily Conc.
04-10-26 15:39:38 000082 10.3 10.0 10.7 11.0 10.5
6) Measuring network protocol
MD03 001 3585+01 82 00 324 000000 002 +3630+01 82 00 324 000000
003 -3585-01 82 00 324 000000
or
MD01 000 +3299+01 48 02 323 000000
8) Parameter list
Print Format 8 provides the Parameter List for the Model 5030 SHARP.
The parameter list provides all internally stored parameters for the
operation and calibration of the Model 5030 SHARP. It is recommended
upon receipt of the Model 5030 SHARP that Print Format 8 (Parameter
List) be downloaded and kept as a record of the manufacturer's default
settings. Upon each calibration and Parameter Change, a download of the
3
)
C), T2 (°C), T3 (°C), T4 (°C), Heater Cycle
°
Model 5030 SHARP Monitor Instruction Manual
Operation
Operation and Service Menus
3-5
Advertisement
Table of Contents
