Calibration
Calibration Menu
4-6
Model 5030 SHARP Monitor Instruction Manual
The display of the Model 5030 will automatically proceed through the HV
and threshold adjustments necessary to bring the detector within operating
specifications. During this automatic procedure, the beta counts (R
alpha counts (R
), and the reference setting (Rref ) are being measured and
α
optimized within this routine.
The procedure is now complete. Press NEXT.
If the Plateau Slope is
>
The instructions to "Insert Filter Tape" are
directed at the user to perform a filter change
prior to initializing this automatic adjustment
procedure. This is described in the "Automated
Detector Adjustment" procedure described
previously. Press START.
10%, repeat the adjustment.
), the
β
Thermo Fisher Scientific