Table of Contents
Advertisement
Operation
Service Menu
Service Menu
Mechanical Control
3-12
Model 5030 SHARP Monitor Instruction Manual
Language
By pressing the SET key, you can either select English, Spanish, or German
language to be displayed:
Press NEXT.
User-selected concentration for the span point of
the analog output range. Possible settings: 0 to
3
10,0000 μg/m
. Press NEXT.
You are now at the Service menu.
The Service menu allows the user to carry out
hardware and component tests and cable
connections. Press YES.
By pressing the SET key, operation can be
switched over between keypad and serial
interface. Please note that without enabling the
keypad, no parameter changes and no actions
can be accomplished. Press NEXT.
This sub-menu enables the measuring head to be
opened and the filter transport to be initiated
manually. Press Yes.
The pump can be switched ON and OFF by
pressing PUMP. Please make sure not to switch
off the pump by pulling off the connecting
cable/plug. Otherwise the device assumes that
the pump is defective or the tubing was pulled
off and consequently sets a corresponding error
status.
Thermo Fisher Scientific
Advertisement
Table of Contents
