Table of Contents
Advertisement
Operation and
Service Menus
Thermo Fisher Scientific
Chapter 3
This chapter describes the front panel display, keypad pushbuttons, and
menu-driven software for the Operation and Service menus. The
Calibration menu is described in the "Calibration" chapter.
Display
The 4 line by 20 character alphanumeric display shows the sample
concentration, instrument parameters, instrument controls, and help
messages. Some menus contain more items than can be displayed at one
time. For these menus, use the BACK and NEXT pushbuttons to move
through the menus and submenus.
Keypad
The keypad of the Model 5030 consists of 4 keys to operate the instrument.
Together with the display unit, these keys form the interactive user surface.
The functions that are covered by the single keys are described in the lowest
line of the display.
BACK,NEXT
YES
YES,NO
+, –
These keys are only for general information. The additional key functions
that are more individual or specific within each menu are described in the
corresponding menu descriptions.
During normal operation, the keyboard usually is locked. The majority of
the menu points and all displays can be accessed by pressing the BACK,
NEXT and YES keys. Changing operational settings and the calibration of
sensors are only possible after unlocking the keyboard. With the keyboard
unlocked only changes to the operational settings are possible. To calibrate
the unit, a code must be entered to further unlock the Calibration menu.
Operation
Moving backwards and forwards within the menu
Entering a sub-menu, carrying out the action(s)
being displayed
Switching on/off parameter flags
Setting numerical values
Model 5030 SHARP Monitor Instruction Manual
3-1
Advertisement
Table of Contents
