What's On The Rear Panel - Thermo Scientific NICOLET iS10 Getting Started

What's on
the rear panel?
Thermo Fisher Scientific
The following drawing shows the connectors that are on the rear panel
of your spectrometer:
50
40
30
20
10
Purge Auxiliary
connector connector
• The USB 2.0 port is where you connect the system computer.
• The power supply port is where you connect the power supply for
the instrument.
• The Accessory connector is used to connect the instrument to a
Nicolet iZ10 module or other accessories.
• The Auxiliary connector allows you to start a data collection
remotely and also allows service personnel to check the function of
the spectrometer.
• The Purge connector is where you connect a purge gas supply.
USB 2.0 Accessory
port connector supply port
Getting Started with an iS10 Spectrometer
Power
7