Reset Event Trace (Rst_Reason) - NXP Semiconductors QorIQ LS1028A Reference Manual

Reset Event Trace (RST_REASON)

Field
WAIT 0= Reset sequencer is operating normally.
1= Reset sequencer is in RMT-WAIT state, waiting for permission to proceed.
6 System Reset:
SYSRST 0= System is operating normally.
1= System is in reset.
5-3 Reserved.
-
2 HRESET_B status:
HRST 0= HRESET_B is not asserted.
1= HRESET_B is asserted.
1 PORESET_B status:
PORST 0= PORESET_B is not asserted.
1= PORESET_B is asserted.
0 RESET_REQ_B status:
RREQ 0= RESET_REQ_B is not asserted.
1= RESET_REQ_B is asserted.
4.33 Reset Event Trace (RST_REASON)
4.33.1 Address
Register
RST_REASON 042h
4.33.2 Function
The RST_REASON register is used to report the cause of the most-recent reset cycle.
QorIQ LS1028A Reference Design Board Reference Manual, Rev. A, 02/2018
90
Function
Offset
Confidential Proprietary
NXP Semiconductors