Related Manuals for NXP Semiconductors TWR-P1025
Summary of Contents for NXP Semiconductors TWR-P1025
- Page 1 Quick Start Guide TWR-P1025 QorIQ Processor with Networking and Industrial Connectivity and Protocol Offload Engine TOWER SYSTEM...
- Page 2 Get to Know the TWR-P1025 TWR-P1025 Freescale Tower System The TWR-P1025 module is part of the Freescale Tower System portfolio, a modular development platform that enables rapid prototyping and tool re-use through reconfigurable hardware. Elevate your design to the next level by building your Tower...
- Page 3 TWR-P1025 The TWR-P1025 processor module can be operated as a stand-alone single board computer (SBC) or a Tower System rapid prototyping development platform. Freescale’s MQX™ real-time OS (shipped separately) support enables applications to quickly migrate from Freescale MCUs up to the high-performance QorIQ P1025 processor featuring networking and industrial connectivity.
- Page 4 Quick Start Guide Step-by-Step Installation Instructions In this quick start guide, you will learn how to set up the TWR-P1025 module and run the included demonstration software. For more detailed information, please see the user manual found on the included DVD or at freescale.com/TWR-P1025.
-
Page 5: Connecting Cables
You can also log in to the module via point-to-point networking demos on a the OpenWRT interface by opening your single TWR-P1025 module. Any Ethernet browser to 192.168.1.1 (you will need to cable can be connected between the connect your PC LAN port to the module’s... -
Page 6: Switch Settings
When the board is powered off, connect See configuration switch settings on the the desired debugger hardware to the following page. standard JTAG/COP header connector J3 lining up pin 1. TWR-P1025 includes on-board debugging circuitry to support CodeWarrior software to work with the board. -
Page 7: Configuration Switch Settings
TOWER SYSTEM Configuration Switch Settings Setting Label Switch Position Label Signals Settings Switch Description Reserved Reserved PCIe Agent Mode PCIE_HOST_AGENT PCIe Host Mode Reserved Reserved Core0 boots, Core1 is in holdoff mode after reset CFG_CPU0_1_BOOT Both cores run after reset Boot sequencer is OFF BOOT_SEQ Boot sequencer is ON... -
Page 8: Warranty
Quick Start Guide Visit freescale.com/TWR-P1025 for the latest information on the TWR-P1025 module, including: • Board database: Schematics, layout and BOM • User manual • Quick start guide • Software BSPs, industrial protocol evaluation stacks and CodeWarrior • Demos and tutorial • Fact sheet Support Visit freescale.com/support for a list of phone numbers within your region.