Siemens SINAMICS S120 Commissioning Manual page 75

Procedure
To interconnect a BICO input, proceed as follows:
1. Click the binector
A connection dialog for the selection of the possible parameters opens. The drive object for
which you want to make an interconnection is displayed automatically in the "Drive object"
drop-down list on the right.
The last set signal source is displayed in the "Selected source" field. If a connection was not
available previously, the value 0 is displayed.
2. Select the parameter that you want to connect.
If connectable bits of the parameter are available, they are displayed in a drop-down list.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
or connector symbol
4.3 BICO interconnections
of the signal that you want to connect.
Fundamentals
73