Signal Table; Measurements (Overlay Measurements) - Siemens SINAMICS S120 Commissioning Manual

3.5.2

Signal table

Overview
The signals of the selected measurement and setting options for individual properties are
displayed in a list in the signal table. Recording data of traces and changed settings in the signal
table are only displayed in online mode. If you switch to offline mode, the information is lost. If
the installed trace is added to the measurements, the current settings of the signal table are
saved in the measurement.
The signals can be sorted using drag-and-drop. The bits of a signal can be resorted within a
signal.
Layout of the signal table
The following figure shows an example of the structure of the signal table.
Further information
You can find additional information on the signal table in the information system of the
Startdrive in the TIA Portal.
3.5.3

Measurements (overlay measurements)

Overview
The "Measurements" tab displays the individual measurements and, for example, provides the
setting options for synchronization.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
Startdrive engineering tool
3.5 User interface - trace function
57