Configuring Motor Details - Siemens SINAMICS S120 Commissioning Manual

Commissioning
5.3 Creating a project offline
5.3.7.3

Configuring motor details

Overview
You can configure the following motor details for motors during commissioning:
• Basic parameter assignment
• Rating plate values
• Motor brake
Procedure
To configure the motor details, proceed as follows:
1. Select the motor in the device view and open the inspector window.
2. In the inspector window, select the "Motor details > Rating plate values" menu.
In the screen form, the following setting options are displayed:
3. To perform the basic parameter assignment for the motor, click the
parameterization" entry.
The function view of the drive axis is opened:
Make the required settings here (see Chapter "Basic parameter assignment (Page 180)").
4. In the inspector window, select the menu "Motor details > Rating plate values" again.
5. Make the settings in the white fields.
The gray fields are refreshed automatically in accordance with your settings.
138
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
icon next to the "Basic