Siemens SINAMICS S120 Commissioning Manual page 107

3. Click on the required Control Unit in the "Control Units" list.
Note
Comparing and possibly changing version numbers
The latest firmware version is always suggested when creating a Control Unit. Under certain
circumstances, the recommended firmware version does not match the version number on
the memory card of your converter. If the version numbers do not match, it will not be
possible to go online later. Therefore, please observe the following notes:
• Observe the version number in the "Version" drop-down list and ensure that the displayed
• If necessary, change the version number via the "Version" drop-down list.
4. Assign a different device name in the input field
5. Click "OK".
OR
Double-click on the required Control Unit.
If the "Open device view" option is activated, the Control Unit is displayed in the device view
in the next step.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
version number matches the version number on the memory card of your converter.
5.3 Creating a project offline
①
if required.
Commissioning
105