Enabling "Sinamics" And "Administrator" User - Siemens SINAMICS S120 Commissioning Manual

Commissioning
5.7 Basic parameterization of the drive objects
Defaults
The web server provides the following default settings for the users "SINAMICS" and
"Administrator":
• "SINAMICS" user
– No password set.
• "Administrator" user
– No password set.
Specifications for secure passwords
Observe the following information and notes for the creation of passwords:
Note
The password must include the following elements to provide protection against unauthorized
access, e.g. unauthorized persons.
• At least 8 characters
• Uppercase and lowercase letters
• Numbers and special characters (e.g. ?!%+)
The password must not be used elsewhere.
5.7.1.4

Enabling "SINAMICS" and "Administrator" user

Overview
The "SINAMICS" user and the "Administrator" user can be enabled with their own specific rights.
Procedure
To enable a user and activate a password, proceed as follows:
1. Activate the "Enable SINAMICS user" option.
AND / OR
2. Activate the "Enable administrator user" option.
184
For these users we recommend that a password is assigned. With a password, you prevent
an attacker from assigning a password and thereby blocking other commissioning
engineers. Also observe the specifications for the creation of secure passwords below.
A password must be assigned for this user. If no password has been assigned, the
following alarm appears when attempting to log on "A09000: Web server security:
Administrator password not set". Also observe the specifications for the creation of secure
passwords below.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2