Voltage Sensing Module Vsm10 - Siemens SINAMICS S120 Commissioning Manual

Diagnostics
6.1 Diagnostics using LEDs
6.1.3.6

Voltage Sensing Module VSM10

Table 6-32 Meanings of the LEDs on the Voltage Sensing Module VSM10
LED Color
READY –
Green
Orange
Red
Green/red
Green/
orange
or
Red/
orange
304
Status Description, cause
Off The electronics power supply is missing or outside the permis‐
sible tolerance range.
Continu‐ The component is ready for operation. Cyclic DRIVE-CLiQ com‐
ous light munication is taking place.
Continu‐ DRIVE-CLiQ communication is being established.
ous light
Continu‐ This component has at least one fault.
ous light
Note:
LED is controlled irrespective of the corresponding messages
being reconfigured.
Flashing Firmware is being downloaded.
light 0.5
Hz
Flashing Firmware download is complete. The system waits for POWER
light 2 Hz ON.
Flashing Detection of the component via LED is activated (p0144 = 1).
light
Note:
Both options depend on the LED status when component rec‐
ognition is activated.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
Remedy
–
–
–
Remove and acknowl‐
edge the fault.
–
Carry out a POWER ON.
–