Using Parameter Lists; Editing The Parameter List - Siemens SINAMICS S120 Commissioning Manual

4.5

Using parameter lists

4.5.1

Editing the parameter list

Overview
The following functions are available in the parameter view:
• Monitoring and editing parameter values
• Changing/restricting parameter view
• Exporting the parameters as CSV
Additional information on the user interface structure is provided in Chapter "Parameter view
(Page 44)".
Monitoring and editing parameter values
Input fields of parameters, which can be changed, are shown in orange in the online mode.
Proceed as follows to change parameters in the online mode:
1. Establish an online connection (Page 152).
2. If necessary, change individual parameter values/settings.
3. Confirm the change with <Enter>.
The settings immediately become effective in the drive.
Changing the parameter view
You can toggle between the following views:
• "Display standard parameters" (default setting):
This view displays the most important and typical parameters of the drive.
• "Display extended parameters":
This view contains parameters that are required by experts for extended settings.
• "Display service parameters":
This view contains parameters that are required by service employees.
Filter selection
Independent of the selected setting, as default, all parameters of a selected drive object are
displayed.
In the secondary navigation, to filter the displayed list, click on the required category (e.g.
commissioning). Only the parameter set for the selected category is then displayed.
Exporting the parameters to CSV file
Files in the CSV format (*.csv) can only be opened in spreadsheet programs or editors.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
Fundamentals
4.5 Using parameter lists
79