Copying Drives From Existing Libraries - Siemens SINAMICS S120 Commissioning Manual

Copying drives from a reference project
You can also copy drives from a reference project. Additional information about using reference
projects is provided in the Startdrive information system under "Editing projects".
Note
Copying and inserting between protected projects
It is not possible to copy and insert drives and drive components between protected projects. You
can only copy and insert drives and drive components if one of the projects has been opened as
reference project.
5.3.4.5

Copying drives from existing libraries

Procedure
Note
Copying and inserting between protected and unprotected projects
Drive parameters and passwords are encrypted if you have activated project protection via the
user management in the TIA Portal. Project protection cannot be withdrawn.
Drives can only be loaded to a global library from unprotected projects. However, drives can be
loaded into a protected project from a global library.
You can also load drives and drive components from an existing library. Additional information
about using global libraries is provided in Chapter "Using libraries (Page 91)" and in the Startdrive
informations system under "Using libraries".
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
Commissioning
5.3 Creating a project offline
109