4. Click "Status word". A mask with the same name opens.
Connect the signal sources for the following areas:
– Sequence control status word (r0899)
– Motor holding brake status word (r1229)
5. Click "Logic operations" in the "Brake control" mask.
The corresponding dialog is opened.
– Interconnect the signal sink for "OR operation" or for "AND operations".
– Click "OK" to confirm the settings and so close the dialog.
5.10.2.2
Opening the brake
Overview
The following describes how you can set the command for the forced opening of the holding
brake.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
Commissioning
5.10 Configuring brake control
273