Importing And Exporting A Trace Recording - Siemens SINAMICS S120 Commissioning Manual

Diagnostics
6.2 Diagnostics via Startdrive
Procedure
To save a trace recording in the project, proceed as follows:
1. Open the trace in the drive with the recorded data (see Chapter "Creating or calling a trace
(Page 318)").
2. Ensure that the actual data from the drive are loaded by activating icon
3. After activating icon
4. Click on icon
The trace recording is added in the system folder
5. Save the project in Startdrive.
The trace recording is saved in the project.
6.2.2.8

Importing and exporting a trace recording

Overview
The following describes how you can import or export a trace recording.
Requirement
• At least one measurement is in the system folder
Exporting a trace recording
To export a trace recording, proceed as follows:
1. Display the measurement in the working area (see Chapter "Creating or calling a trace
(Page 318)").
2. Click on the
The "Save as..." dialog box opens.
3. Select a folder, file name and possibly a file type to save the trace recording.
4. Click the "Save" button.
The selected trace recording is saved in the specified folder.
Importing a trace recording
To import a trace recording, proceed as follows:
1. Select the
menu.
The "Open" dialog box is opened.
2. Select the file of the "*.ttrecx" file type with the trace recording to be imported.
3. Click the "Open" button.
The selected trace recording is imported into the project.
326
wait until all data have been loaded and displayed.
.
icon or select the "Export measurement" shortcut menu.
"Measurements" system folder and select the "Import measurement" shortcut
"Measurements".
"Measurements" for export.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
.