Digital Output, Isolated (Cu310-2 Pn) - Siemens SINAMICS S120 Commissioning Manual

Function diagrams (see SINAMICS S120/S150 List Manual)
• 8134
Parameters (see SINAMICS S120/S150 List Manual)
Adjustable parameters
• p0771[0...2]
• p0777[0...2]
• p0778[0...2]
• p0779[0...2]
• p0780[0...2]
• p0783[0...2]
• p0784[0...2]
Display parameters
• r0772[0...2]
• r0774[0...2]
• r0786[0...2]
5.7.1.17

Digital output, isolated (CU310-2 PN)

Overview
The digital output is used for signal feedback (e.g. enable signals). The digital output is
interconnected via a BICO interconnection.
Procedure
Proceed as follows to interconnect the digital output:
1. Interconnect the signal sink of digital output 16.
2. If required, invert this output via the icon.
The icon
Control via onboard terminals
You can find additional information about controlling via onboard terminals in the Startdrive
information system.
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2
Diagnostics - measuring sockets (T0, T1, T2)
CI: Measuring sockets signal source
Measuring sockets characteristic curve value x1
Measuring sockets characteristic curve value y1
Measuring sockets characteristic curve value x2
Measuring sockets characteristic curve value y2
Measuring sockets offset
Measuring sockets limitation on/off
Measuring sockets signal to be output
Measuring sockets output voltage
Measuring sockets scaling per volt
indicates the inversion.
5.7 Basic parameterization of the drive objects
Commissioning
203