Bosch rexroth Sytronix SvP 7030 IMC Operating Manual page 20

Sytronix SvP 7030 IMC
20 / 186
Bosch Rexroth AG
Insufficient hydraulic fluid!
NOTICE
If you commission or operate the Sytronix system
without or with insufficient hydraulic fluid, the control
system is immediately damaged or even destroyed.
−
When commissioning or re-commissioning a machine
or system, make certain that the housing chamber as
well as the suction and working lines of the Sytronix
system are filled with hydraulic fluid and remain filled
during operation.
Corrosion due to water and saltwater!
NOTICE
Contact with salt water leads to increased corrosion.
Thus, mounting screws and plug screws as well as move-
able components may be chemically corroded and dam-
aged and thus cause leakage and oil getting into the envi-
ronment.
−
So take suitable corrosion protection measures, e.g.
by means of an anti-corrosion coating.
RE 62312-B, 03.2022