Qualification Of Personnel; General Safety Instructions - Bosch rexroth Sytronix SvP 7030 IMC Operating Manual

Sytronix SvP 7030 IMC
12 / 186

General safety instructions

● If you do not adhere to the technical data, operating conditions and per-
● If you do not observe national EMC regulations during operation for the
● If you use the Sytronix system SvP 7030 with a conventional MS2N motor in
2.4

Qualification of personnel

The activities described in this documentation require basic knowledge of
mechanics, electrics and hydraulics as well as knowledge of the appropriate
technical terms. In order to ensure safe use, these activities may only be car-
ried out by an expert in the respective field or an instructed person under the
direction and supervision of an expert.
Experts are those who are able to recognize potential hazards and apply the
appropriate safety measures due to their professional training, knowledge and
experience, as well as their understanding of the relevant requirements per-
taining to the work to be undertaken. An expert must observe the relevant
specific professional rules and have the necessary expert knowledge. Expert
knowledge means for example:
● The ability to read and completely understand electrical and hydraulic circuit
● Having knowledge of the wiring of electrical components, in particular, com-
● Knowledge of the function and structure of hydraulic components as well as
● Basic knowledge of open and closed-loop control technology and the ability
Bosch Rexroth offers training courses that support your qualification in spe-
cific fields. You can find an overview of training contents on the Internet at:
⮫ https://www.boschrexroth.com
2.5 General safety instructions
● Observe the valid regulations on accident prevention and environmental pro-
● Observe the safety regulations and provisions of the country in which the
● Exclusively use Rexroth products in technically perfect condition.
● Observe all notices on the product.
● Persons who install, commission, operate, demount or maintain Rexroth
● Only use accessory and spare parts released by the manufacturer in order to
● Comply with the technical data and ambient conditions specified in the
Bosch Rexroth AG
formance limits specified in the data sheet and given in the order confirma-
tion.
application at hand. The manufacturer of the system or machine is respon-
sible for complying with the limit values stipulated in national regulations
(European countries: EU Directive 2014/30/EU (EMC Directive); USA: See
National Electrical Code (NEC), National Electrical Manufacturers Associa-
tion (NEMA) as well as regional engineering regulations.
a potentially explosive atmosphere.
diagrams,
pletely understanding the correlations regarding safety equipment and
of their installation and connection,
to parameterize application software
tection.
product is used/applied.
products must not consume any alcohol, drugs or pharmaceuticals that may
affect their ability to respond.
rule out personnel hazards arising from unsuitable spare parts.
product documentation.
RE 62312-B, 03.2022