Bosch rexroth Sytronix SvP 7030 IMC Operating Manual page 15

RE 62312-B, 03.2022
Product and technology-related safety instructions
Unexpected machine movements!
WARNING
Working on running systems poses a danger to life
and limb. The work steps described in these operating
instructions may only be performed on shut down sys-
tems. Before beginning work:
−
Make sure that the drive motor cannot be switched
on.
−
Make sure that all force-transmitting components and
connections (electrical, pneumatic, hydraulic) are
switched off according to the manufacturer's instruc-
tions and are secured against restarting. If possible,
remove the main fuse of the system.
−
Make sure that the system is completely depres-
surized. Please follow the system manufacturer's
instructions.
−
Only qualified personnel are authorized to install the
Sytronix system.
Lines under pressure!
WARNING
Risk of injury by catapulted components or plug screws
due to breakage of the weakest system component (e.g.
due to missing pressure relief feature).
−
Do not exceed the maximum operating pressure!
−
Limit the pressure in the system by means of over-
pressure elements.
−
Test the system at test pressure according to ISO
4413.
−
Never disconnect, open or cut pressurized lines!
−
Before carrying out any installation or other work,
depressurize the Sytronix system.
High electrical voltage!
WARNING
Danger to life and risk of injury caused by electric shock!
−
The Sytronix system may only be connected by or
under the supervision of a skilled electrician.
−
Switch off the power supply before all maintenance,
repair or installation work and secure it against
restarting.
−
Before starting installation work, plugging and
unplugging connectors, and carrying out any work,
switch the Sytronix system off. Secure the electrical
equipment against restarting.
−
Before switching the control system on, check the
protective conductor on all electrical devices for
proper connection according to the wiring diagram.
Fire and explosion!
WARNING
In conjunction with heat sources, leaking hydraulic fluid
can result in fire or explosion.
−
Inspect the Sytronix assemblies for leakage.
−
Keep sources of heat and fire away from hydraulic oil
and ensure sufficient ventilation.
Sytronix SvP 7030 IMC
Bosch Rexroth AG
15 / 186