Bosch rexroth Sytronix SvP 7030 IMC Operating Manual page 131

Screw thread
Tightening torque
Occurring current load and minimum
required connection cross section
Occurring voltage load
1) Maximum allowed length of ring cable lug: 38 mm; insulate ring cable lugs
with heat shrink sleeves
Accessories, shield connection:
● XCS*-W0150/180:
Typical motor cable cross section: 1 × 16 mm:
Double wiring with 2 × 10 mm
XD03, motor connection (120 mm2)
Table 102: Function, pinout, properties
View
Terminal block
Connection cable
stranded wire with ring cable lug
Screw thread
Tightening torque
Occurring current load and minimum
required connection cross section
Occurring voltage load
1) Insulate ring cable lugs with heat shrink sleeves
Accessories, shield connection:
● XCS*-W0210/250/280
Typical motor cable cross section:
● 1 × 50 mm:
● Double wiring with 2 × 25 mm
RE 62312-B, 03.2022
Connecting the Sytronix system SvP 7030 electrically
AWG
Nm
– XAS2-007-001-NN
– XAS2-007-002-NN
Identifi-
cation
A1
A2
A3
Unit
mm
2
AWG
1)
Nm
– XAS2-004-001-NN
– XAS2-004-002-N
2
Sytronix SvP 7030 IMC
4
see technical data of device used (I
see technical data of device used (U
2
is possible using twin wire end ferrule.
2
)
2
Function
For power connection U1 at motor
For power connection V1 at motor
For power connection W1 at motor
min.
1×16, 2×16
1×6, 2×6
16
see technical data of device used (I
see technical data of device used (U
is possible using twin wire end ferrule.
2
131 / 186
1×1/0
M6
5
and A
LN LN
or U
LN LN_nom
max.
1×120, 2×120
1×4/0, 2×4/0
M10
20
and A
LN LN
or U
LN LN_nom
Bosch Rexroth AG
)
)
)
)